CRIXUS SX200 - EXPLORE THE FEATURES
CONTROL
TOUCHSCREEN
Crixus SX200 has a 3.5-inch touchscreen with a resolution of 320 x 480.
GUI INTERFACE
A simple and functional printer control system
COMMUNICATION
PORTS
You can upload models for printing using the traditional method using three USB ports and a slot for an SD and Micro SD card
WI-FI
You can also connect to the printer via a WI-FI connection, which allows you to send models for printing to the printer and update the firmware or interface.
EXTRUDER
EX250
Extruder SX200 has been designed to enable easy disassembly of the heating head and effective cooling at 250 C.
Plug and play head, very easy assembly and disassembly, no need to disassemble the extruder.
- Max operating temperature 250
- Heating rate up to 250 ‘C in 1 minute +/-
The head is cooled by 4 fans.
- Efficient cooling process.
- Fast cooling of the Head.
Precise measurement when calibrating the table.
- Measurement accuracy up to 0.06 mm
The 3D printing layers are cooled by 2 fans.
- 360′ airflow
PLUG AND PLAY
Easy replacement of the head using a simple plug-in system, you do not need to disassemble the housing or disconnect any cables, just pull the front module with Lidar, which is magnetically mounted, unscrew 2 screws and you can pull out the heads, which allows you to precisely set the appropriate distance.
PLATFORM
WORKING AREA
With a printing area of 200 x 200 x 200 mm
CALIBRATION
The table is calibrated by setting each corner at the appropriate height using plastic manipulators rotated 360′.
To facilitate the positioning of the platform, a LIDAR laser scanner was used, which operates with an accuracy of 0.06 mm. As the height of a given corner of the platform changes, the distance between the platform and the head is displayed on the screen.
OVERLAY
The platform heats up to 150 ‘C in less than 2 minutes. The removable cover made of stainless steel allows you to quickly remove the print without removing the clips or performing other activities, just grab the handle and pull the cover.
The handle of the cover is separated by a geometric pattern, which prevents the handle from heating up.
FILAMENT
The CRIXUS SX200 printer allows you to print in many materials available on the market. Reels up to 2 kg can be mounted
From 700 g to 2000 g
ABS
ABS smart
PLA
PLA pro
PETG
TPU
HIPS
ASA
The printer has a sensor that stops printing when there is no filament.
HEPA FILTER
The printer is equipped with a HEPA filter. Easy disassembly of the filter container, just pull the housing.
CAMERA
Thanks to the camera installed in the chamber, you can track the printing progress via internet connection. The camera works in Full HD 5 Mpx resolution.
DRONE HUB
DRONE HUB is an application that allows communication with the printer via the internal WI-FI network. The application allows you to add new printers, track the printing progress, and observe the printing process via a webcam. The application also allows you to send models to the printer or remotely update the Firmware or Interface.
DIMENSIONS
PRINTER SPECIFICATIONS
Dimensions
61 x 40 x 40 cm
Libra
15kg
Print technology – FFF
Filament diameter – 1.75 mm
Layer height – 0.1 – 0.4 mm
Maximum head temperature – 250 C
Maximum platform temperature – 150 C
Maximum print area – 200 x 200 x 200
Maximum layer thickness – 0.4 mm
Print precision – 0.1 mm +/-
Platform leveling method – semi-automatic using a LIDAR sensor
Nozzle diameter – 0.4 mm
Connectivity – USB x 3, SD, Micro SD, WI-FI
Supported materials – ABS / ABS smart / PLA / PLA pro / PETG / TPU / HIPS / ASA
Operating voltage – 230 V
Maximum consumption – 600 W
Dedicated CRIXUS SX200 Interface
Filter type – HEPA
Filter dimensions – 80 x 80 x 10 mm. Universal filter.
Fans – 80 x 80 mm x 2
Camera
Filament sensor
3.5′ touch screen